HOME



GRADUATE
STUDENTS


Year Student Name Research Topic Program Current Work
2003 Riccardo Lazzaro Nonlinear Aeroelasticity PhD

Ferrari F-1, Italy
2003-2004 Kiran Cheguri Topic: Vibration Control of Structural Systems ME

N/A

PTA, New Jersey
2003-2004  Arthur Michalek MS Thesis: Effects of an In-Plane Axisymmetric Electromagnetic Field on the Vibration of a Thin, Spinning Disk MS PhD @ UVM, VT
2004-2006 Chrissy Rubillo MS Thesis: Non-Linear Aeroelasticity and Control of 2-D Lifting Surfaces MS

GE
2004-2006 Steve Schober  MS Thesis: Modeling and Computation of Synthetic Jet Actuators for Flow and Aeroelastic Control MS

Lockheed Martin
2004 Venkatesh Venkataramanujam Topic: Structural Health Monitoring ME

Cropped logo with "Florida Institute of Technology"

MS, PhD @ FIT, FL
2004- Miguel Pereira MS Thesis Topic: AeroThermo and AeroMagneto Elasticity of Flexible Systems MS

USA
2005 Albert Campbell Topic: Structural Health Monitoring of Flexible Structural Systems MS    
2006-2007 Keegan O'Donnell MS Thesis: Lifting Surfaces Aeroelastic Experimental Investigation of Active Flow Control Using Synthetic Jet Actuators MS GE
2006- Mitch Stolk MS Thesis: Modeling and Computation of Lifting Surfaces Hosting Flow Control Actuators MS  
2006- Attilio Milanese Proposal: Volterra Series Revisited, With Applications In Nonlinear Structural Dynamics And Aeroelasticity PhD  
2006- Meilu He Urban Airshed Monitoring: New Tools for Aerosol Characterization at Meso-Scale Spatial Resolution (joint with S. Dhaniyala) PhD  
2006- Carl Hoover MS Thesis: Design and Experimentation of a Flutter-Like Aeroelastic Power Source FLAPS MS PhD @ CU
2006-2007 Lucas Craig MS Thesis: Investigation of Fluid Flow and Particle Dispersion within a shock wave of an Explosion (joint with G. Ahmadi, S. Dhaniyala) MS PhD @ CU
2007- Al. O. Alhabahbeh Reliability Analysis of Gas Turbine System Components (joint with D. Aidun) PhD  
2007- Mahmood Izadi Modeling and experimentations for Gas Turbine System Components (joint with D. Aidun) PhD  
2008- Marissa LaCoursiere Thermal Model for Gas Turbine System Components (joint with D. Aidun) PhD  
2006-2008 Abhishek S. Ekbote MS Thesis: An Experimental Study to Investigate Corrosion behavior of 90/10 Cu/Ni alloy used in a Heat Exchanger of Gas Turbine system (joint with D. Aidun) MS  
2006-2008 Ryan C. Crocker MS Thesis: Finite Element Modeling and Reliability Analysis of the Fin to Tube Bond Degradation Due to Thermal Fatigue in a Plate-Fin Heat Exchanger (joint with D. Aidun) MS PhD @ UVM, VT
2006- Kejing He Proposal: Modeling and Experimental Verification of the Friction Stir Welding of Dissimilar Materials with a FGM Concept (joint with D. Aidun) PhD  
2006-2008 Steven Finley MS Thesis: Integration of Commercial Computer Aided Engineering Software To Perform Multidisciplinary Optimization  (joint with K. Willmert) MS/PhD
2007- Snehal Sawant SHM of composite panels MS  

UNDERGRADUATE
STUDENTS


Year    Student Name   Project Title  
Summer 04 A. Gnann Health Monitoring of Aircraft Wing via Adaptive Control    
Summer 05 C. Libordi Structural Health Monitoring    
Summer 05 C. McBee Structural Health Monitoring    
2004 D. Streibich Unmanned Aerial Vehicles: Design and Prototyping    
Spring 2005 A. Campbell, G. Sanders Evaluation of Output Only Codes for SHMT    
Summer 06 C. McNall Development of an Aeroelastic Experimental Apparatus    
Summer 06 K. O'Donnell Development of an Aeroelastic Experimental Apparatus    
2004, 2005,2006 Team i-UAV Team, TurboJet Team, Wright Brother Glider Club    
2008 A. Friebel Active Flow Control for Wind Turbine Technologies    
         
  see resume for updates      

HONOR
STUDENTS


Year    Student Name   Project Title Current Work
2004 C. Cormier Buckling Analysis of an Inflatable, Non-Rigidizable Wing Penn State University
2005 C. Mundy Flow and Aeroelastic Control via Synthetic Jets Boeing Co.
2006 A. Bingham Stability and Control of a MARS Re-entry Vehicles Jet Propulsion Laboratory
2007 Dan Valyou Flight control, Data Acquisition, and Payload Integration for an Aerosol Sampling Unmanned Aerial Vehicle  
2007 Laura Bear Flow Visualization of the Velocity Field of a Synthetic Jet Using the Method of Molecular Tagging Velocimetry  
Summer 2007 Z. Gibbons Flight control, Data Acquisition, and Payload Integration for an Aerosol Sampling Unmanned Aerial Vehicle  
2008 Dan Valyou Flight control, Data Acquisition, and Payload Integration for an Aerosol Sampling Unmanned Aerial Vehicle  
2008 Frank Hemsing Energy Harvesting – FLAP development  
         
    see resume for updates    

Mc NAIR/C-STEP
STUDENTS


Year    Student Name   Project Title
2004 A. Roman i-UAV stiffness characterization
2004 Q. Sodji i-UAV CFD modeling
2005 J. Dearborn Inflatable structures torsion tests
2005 M.K. Kamaludeen Adaptive Aeroelastic Vibration Suppression of a Supersonic Airfoil with Flap
2006 C. McNall Development of an Aeroelastic Experimental Apparatus
2007 D. Gonyer Experimental investigation into the implementation of  Smart Wind Turbine Blades
2007 J. Holla Acoustic Analysis of Blade Modifications on a Scale Model Helicopter
2008 M. Joslin Hardware in the Loop and Control Modeling for Wind Turbines Technologies
2008 D. Barbecho Molecular Tagging Velocimetry Experiment to Evaluate Synthetic Jet Actuator Performance
     
    see resume for updates

VISITING
SCHOLARS


Year   Student Name    Degree, University Project Title Current Work
Spring 05 Chris Chang  MS Student, Imperial College, UK MS Thesis: Conceptual Design and Realization of an Inflatable Uninhabited Aerial Vehicle Singapore Navy
Spring 05 Thomas Rendall MS Student, Imperial College, UK MS Thesis: Static, Dynamic and Aeroelastic Behavior of Inflatable UAV Wing university logo icon University of Bristol
Summer 05 Enrico Cestino Ph.D Student, Politecnico di Torino, Italy PhD Thesis: High Altitude Long Endurance UAV Nonlinear Aeroelasticity Politecnico di Torino
Fall 05 Filippo Testa MS Student, Universita’ di Catania, Italy MS Thesis: Non Linear Aeroelastic Behavior of Highly Flexible Wings Politecnico di Torino
Spring 06 Thomas Calder MS Student, Imperial College, UK MS Thesis: Design of a Morphing Inflatable Wing Rolls Royce Aircraft Engines Rolls Royce Aircraft
Spring 06 Ewan Crosbie MS Student, Imperial College, UK MS Thesis: Aeroelastic and Aerodynamic Control of a Morphing Inflatable UAV Wing RWDI Consulting Engineering
Summer 06 Fabio Borello Ph.D Student, Politecnico di Torino, Italy PhD Topic: Probabilistic Design in Advanced Composite Materials Politecnico di Torino
Summer 08 Sergey Verlinsky State Engineering University of Armenia Armenia Modeling and Characterization of Friction Stir Welding Process SEUA, Armenia
Summer 08 Karen Ghazaryan Armenia Academy of Sciences, Armenia Wave Propagation and MagnetoElasticity AAS, Armenia
Summer 08 Sohaib Obeid Université de Paul Sabatier, Toulouse, France FEM of Novel Wind Turbine Concepts  
           
      see resume for updates    

i-UAV Team
STUDENTS


Team members
Joseph Lazar; Andrew Colletti; Christopher Singer, Peter Coffin
Former Members
C. Bastien, M. Feldman, J. Leahy, D. Beckmann, J. Ngambo, A. Roman, Q. Sodji, D. Streibich,  D. McCarney, R. Hover, M. Brown, A. Gnann, C. Staniunas, TJ. Pond, G. McCain, J. Rohr, J. Butler, S. Schober, C. Cornier, N. Foti, M.J Brewer, Chris Zupp, Charles McNall, Christopher Stout,  Jeffrey Senkiw, Chimezie Agwu, Jason Parente, Erik Hamilton, Chris Chang, Tom Rendall, Chris Libordi, Max Dougherty

The i-UAV Team is co-coordinated with Erik Bollt (MCS).
Web page http://www.clarkson.edu/~pmarzocc/i-uav/i-uav-web.html

TURBOJET Team
STUDENTS


Team members
tba
Former Members
Giovan V Scialdone; Matthew J Brewer; Brian T Bohan; Joshua Butler; Joshua Edlinger; Robert L Hover; Chris Zupp, Chimezie Agwu, Christopher Stout, Chris McBee, Andrew Collins, Lindsay Roberts

The TurboJet Team is co-coordinated with Valerio Viti (Fluent Inc.
Web page http://www.clarkson.edu/~pmarzocc/.... under construction

Graduate Thesis Committees


Year               Student Name     Status                                                                 Program
2005               Chen Li                  PhD Committee Member                                       MAE
Fall 2004        Peri MD Murthy     MS Committee Member                                         MAE
Fall 2004        Feixia Yu                PhD Committee Member                                       ECE
Fall 2006        Wei Chen              PhD Committee Member                                       MAE

Spring 2005   Vishnu Rao           MS Committee Member                                         ECE

see resume for updates

CU Students Papers and Presentations


A. Refereed Journal Publications

 

1.  A.J. MICHALEK, P. MARZOCCA, J. MOOSBRUGGER, D. HASANYAN, “Effects of an In-Plane Axisymmetric Magnetic Field on the Vibration of a Thin Conductive Spinning Disk,” Journal of Applied Physics, Vol. 97, 10R509, 2005.
2.  P. MARZOCCA, L. LIBRESCU, D.H. KIM, I. LEE, S. SCHOBER “Generalized Transonic Unsteady Aerodynamics via Computational-Fluid-Dynamics Indicial Approach,” AIAA Journal, Vol. 43, No. 4, April 2005, pp.915-921.

3.  D.-H. KIM, I. LEE. P. MARZOCCA, L. LIBRESCU, S. SCHOBER “Transonic Aeroelastic Analysis of a 2-DOF Airfoil Using CFD/Nonlinear Indicial Approach,” Submitted to Journal of Aircraft, Accepted, In press, 2005.

4.  A. BEHAL, P. MARZOCCA, V.M. RAO, A. GNANN, “Nonlinear Adaptive Control of an Aeroelastic 2-D Lifting Surface,” Submitted to Journal of Guidance, Control, and Dynamics, Accepted, In press, January 2006.

5.  A. BEHAL, V.M. RAO, P. MARZOCCA, M. KAMALUDEEN “Adaptive Control for a Nonlinear Wing Section with Multiple Flaps,” Submitted to Journal of Guidance, Control, and Dynamics, Accepted, In press, 2006.

6.  C. RUBILLO, E. BOLLT, P. MARZOCCA, “Active Aeroelastic Control of Lifting Surfaces via Jet Reaction Limiter Control,” Submitted to International Journal of Bifurcation and Chaos, Accepted, In press, September 2006.
7.  P. MARZOCCA, L. LIBRESCU, D.-H. KIM, I. LEE, S. SCHOBER, “Unsteady Aerodynamics of Airfoils in Various Flight Speed Regimes Using a Combined CFD - Indicial Approach,” Submitted to Aerospace Science and Technology, June 2005.

8. V.M. RAO, A. BEHAL, P. MARZOCCA, R. SADAGOPAN, “Adaptive Aeroelastic Vibration Suppression of a Supersonic Airfoil with Flap,” Submitted to Aerospace Science and Technology, May 2005.

9.  M. BELUBEKYAN, K. GHAZARYAN, P. MARZOCCA, C. CORMIER, “Localized Bending Waves in a Rib-Reinforced Elastic Orthotropic Plate,” Submitted to ASME Journal of Applied Mechanics, May 2005.

 

B. Conferences Proceedings

 

1.  P. MARZOCCA, R. LAZZARO, L. LIBRESCU, “Flutter/Aeroelastic Response of Panels via a Combined Galerkin-Volterra Series Approach.” AIAA-2004-1855, 45th AIAA/ASME/ ASCE/ASC Structures, Structural Dynamics, and Materials Conference, Palm Springs, California, 19-22 Apr 2004.

2. P. MARZOCCA, A. BEHAL, A. GNANN, “Adaptive Control Based Structural Health Monitoring Technique,” CANSMART 2004, 7th Cansmart Meeting International Workshop on Smart Materials and Structures, October 21-22, 2004, Montreal, Quebec, Canada.

3. A.J. MICHALEK, P. MARZOCCA, J. MOOSBRUGGER, D. HASANYAN, “Effects of an In-Plane Axisymmetric Magnetic Field on the Vibration of a Thin Conductive Spinning Disk,” MMM 2004, 49th Conference on Magnetism and Magnetic Materials, November 7-11 2004, Jacksonville, Florida.

4. L. LIBRESCU, P. MARZOCCA, M. PEREIRA “Flutter and Post-Flutter Control of Geometrically Nonlinear Panels Operating in a Supersonic/Hypersonic Flow Field,” Paper IMECE2004-61373: IMECE 2004, 2004 ASME Int’l Mechanical Engineering Congress & Exposition, Session: AMD-10 B Multi-field Coupling in Dynamic Systems and Control, 14-19 November 2004, Anaheim, CA, USA.

5.  C. RUBILLO, P. MARZOCCA, E. BOLLT, “Active Aeroelastic Control of Lifting Surfaces via Jet Reaction Limiter Control,” AIAA-2005-2076, 46th AIAA/ASME/ASCE/ASC Structures, Structural Dynamics, and Materials Conference, Austin, Texas, 18-21 April 2005.

6.  A. MICHALEK, P. MARZOCCA, D. HASANYAN, J. MOOSBRUGGER, “Vibration and Critical Speed of Spinning Disks Under an In-Plane Axisymmetric Magnetic Field: Analytical Predictions and Experimental Verification,” AIAA-2005-2256, 46th AIAA/ASME/ASCE/ASC Structures, Structural Dynamics, and Materials Conference, Austin, Texas, 18-21 April 2005.

7.  P. MARZOCCA, L. LIBRESCU, M. PEREIRA, “Flutter/Postflutter and Active Control of Thermally Degraded Supersonic Panels,” 6th International Congress of Thermal Stresses and Related Topics, TS2005, Vienna, Austria, 26-29 May 2005.      

8. C. RUBILLO, E. BOLLT, P. MARZOCCA, “Limiter Control of a Nonlinear Wings,” SIAM Conference on Applications of Dynamical Systems, Snowbird Ski and Summer Resort, Snowbird, Utah, May 22-26, 2005.

9.  V.M. RAO, A. BEHAL, P. MARZOCCA, Adaptive Aeroelastic Control of a Supersonic Wing Section with Flap,” AIAA Guidance, Navigation, and Control Conference and Exhibit, San Francisco, California, August 16-19, 2005.

10. P. MARZOCCA, L. LIBRESCU, M. PEREIRA, “Aeroelasticity of Supersonic Panels in High Temperature Environment: Flutter, Post-Flutter and Their Control,” IMECE2005-80573, IMECE 2005, 2005 ASME Int’l Mechanical Engineering Congress & Exposition, Session: Instability in Solids and Structures, November 5-11, 2005, Orlando, FL, USA.

11. V.M. RAO, A. BEHAL, P. MARZOCCA, “Hierarchical Adaptive Controller for a Nonlinear Aeroelastic Wing Section with Multiple Control Surfaces,” Paper 2608, CDC-ECC'05, 44th IEEE Conference on Decision and Control and European Control Conference ECC 2005, Seville, Spain, December 12-15, 2005.

 

C. Poster Presentations

 

1.  A. ROMAN, “i-UAV Project: structural characterization” Mentor: P. Marzocca, B. Helenbrook, E. Bollt, K. Visser, SURE Conference 2004, Clarkson University, July 2004.

2.   Q. SODJI, “i-UAV Project: CFD modeling” Mentor: P. Marzocca, B. Helenbrook, E. Bollt, K. Visser, SURE Conference 2004, Clarkson University, July 2004.

3.  A. GNANN, “Adaptive Control Based Structural Health Monitoring Technique,” Mentors: P. Marzocca, A. Behal, SURE Conference 2004, Clarkson University, July 2004.

4.  C. RUBILLO, “Active Aeroelastic Limiter Control of a Nonlinear Wings,” SIAM Conference on Applications of Dynamical Systems, Snowbird Ski and Summer Resort, Snowbird, Utah, May 22-26, 2005.

5.  M.K. KAMALUDEEN, V.M. Rao  “Adaptive Aeroelastic Vibration Suppression of a Supersonic Airfoil with Flap,” Mentors: P. Marzocca, A. Behal, SURE Conference 2005, Clarkson University, July 2005.

6.  C. McBEE, C. LIBORDI, V.M. RAO, “Damage Detection Based on Structural Dynamic Characteristics,” Mentors: P. Marzocca, A. Behal, SURE Conference 2005, Clarkson University, July 2005.

 

D. Technical Reports

 

1.  C.W.C. CHANG, P. MARZOCCA, ”Conceptual Design and Realization of an Inflatable Uninhabited Aerial Vehicle,” Department of Mechanical and Aeronautical Engineering Clarkson University, Potsdam, NY 13699-5725, MAE Report No. 374, June 2005.

2.   T.C.S. RENDALL, P. MARZOCCA, “Static, Dynamic and Aeroelastic Behavior of Inflatable UAV Wing,” Department of Mechanical and Aeronautical Engineering, Clarkson University, Potsdam, NY 13699-5725, MAE Report No. 375, June 2005.

3.  C.P. CORMIER, P. MARZOCCA, “Buckling Analysis of an Inflatable, Non-Rigidizable Wing,” Department of Mechanical and Aeronautical Engineering, Clarkson University, Potsdam, NY 13699-5725, MAE Report No. 376, June 2005.

 

E. Undergraduate and Graduate Research Papers and Presentations

 

1.  J. THOMSON, “Assessment of Visual Stabilization for Controlling Unmanned Aerial Vehicles,” AIAA Region I-NE Student Conference, Princeton University, April 22-23, 2005. – Best paper Award: 3rd place.

2. T. RENDALL, C. CHANG, “Aerodynamic and Aeroelastic Characterization of a Non-Rigidizable Inflatable UAV,” AIAA Region I-NE Student Conference, Princeton University, April 22-23, 2005.

3.   C.P. CORMIER, “Buckling Characterization of an Inflatable, Non-Rigidizable Wing,” AIAA Region I-NE Student Conference, Princeton University, April 22-23, 2005.

4.  S.J. SCHOBER, “Multiple Synthetic Jet-Airfoil Synthesis:  Potential for Aerodynamic Improvement and Aeroelastic LCO Control,” AIAA Region I-NE Student Conference, Princeton University, April 22-23, 2005.

5.  R. HOVER, J. THOMSON, “Feasibility Analysis of a Jet-Rocket Launch System” AIAA Region I-NE Student Conference, Princeton University, April 22-23, 2005.

6.  J. DEARBORN, “Inflatable-Winged Unmanned Aerial Vehicle,” SURE Conference 2005, Clarkson University, July 2005.

Back to the top Copyright ©2003- Marzocca Piergiovanni. All rights reserved. Privacy policy. Thusday, 18-Sept-2003 08:37:09 ET